manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 187

183

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

4.2.12

Adjusting needle brushes

The needle brushes must be adjusted when errors occur during stitch 
formation, e.g. drop stitches.

The needle brushes open the needle latches for laying in the thread. They 
are swivel-mounted so, that they are always inclined in the direction of 
travel of the carriage assembly.

Inclination of needle brushes

The needle brushes are correctly adjusted when

the brushes project an equal distance over both sides of the holder The 
markings on the brush are visible on both sides.

the canted surfaces (3) opposite each other

the brushes do not touch the needle hooks of the fully raised needles 
(RR). The distance (4) is to be 0.5 mm to 1 mm.

   

Adjusting needle brushes:

1. Release hexagon nut (2).

2. Adjust needle brush at screw (1).

3. Retighten hexagon nut (2).

4. Adjust needle brushes on all systems.

5. Call up "Manual interventions" window.

6. Move carriage assembly at low speed. To do this, press "Move 

stepwise" button and check the setting of the needle brushes.

Key

Function

Call up "Manual interventions" window

Key for calling up "Manual interventions" window

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands