Stoll CMS 730 S Operating Instructions Manual Download Page 138

Page: 138 / 468

Adjusting knitting machine

Basic settings 4.1

134

4.1.10

Processing fabric take-down menu

In the fabric take-down menu (WMF menu), the fabric take-down
commands are combined into a single function which concerns a knitting
situation.

Adjusting fabric take-down menu:

1. Call up the "additional function keys" in the "Take-down" window.

2. Call up the "WMF menu" window.

3. Touch the line to be edited.



The line appears at the bottom edge of the window.

4. Tap the fields of the selected line and enter the desired values.

- or -

➜

Copy contents of a line and insert at desired location again.

5. Confirm entries.

6. Return to the "Take-down" window.

Save fabric take-down menu

If you save the pattern, the changes in the fabric take-down menu are saved
in the setup file.

Further information:



Working with files, libraries and folders [-> 231]

Key

Function

Call up "Take-down" window

Call up "Additional function keys"

Call up "WMF menu" window

Confirm entries

Keys for adjusting the fabric take-down menu

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands