Stoll CMS 730 S Operating Instructions Manual Download Page 134

Page: 134 / 468

Adjusting knitting machine

Basic settings 4.1

130

4.1.7

Adjusting storage feed wheel MSF 3 *



Storage feed wheel MSF 3

The optimal yarn tension depends on the yarn and the pattern. This
adjustment is the easiest to undertake while the machine is knitting.

Adjusting the yarn tension:

1. Adjust the yarn tension at the rotary knob (1):



The contact pressure of the membrane (2) is changed this way.

2. Check: No thread loop may be formed between the feed wheel and the

safety door.

3. The rotary knob has to engage in the brake (3).

You will find further information on the storage feed wheel MSF 3 in the
operating instructions which are enclosed.

Further information:



Symbols in this document [-> 12]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands