Stoll CMS 502 HP+, Operating Instructions Manual

Page: 458 / 562

458
7
Repairing the knitting machine
Needle selection displacement
Preparations
7.6.2 Preparations

Stop the carriage after the left reversing position.

With tandem machine: Couple carriage narrow.

Cast-off the stitches on both needle beds.

Remove the needle brushes on the front and rear carriage part.

The test series is required for all the impulse sensors of the machine - with
a tandem machine there are four impulse sensors.

For the check you need a small knitting program.
Example for a 3-system machine.
Line 30: Check of the front impulse sensor
Line 40: Check of the rear impulse sensor
If you have a 2-system machine simply leave out the indication "S3" for the
third knitting system in the lines 30 and 40.