Stoll CMS 502 HP+ Operating Instructions Manual Download Page 307

Page: 307 / 562

307

Setup Data

Using Setup1 or Setup2

5.3 Using Setup1 or Setup2

How to generate a setup-file?



Generating it together with the pattern on the M1plus.
Starting with the 5.2 version of the M1plus you can choose among Setup

in Sintral, Setup1, Setup2



Generating it manually (with Setup1 only)

Setup1

usable for all machines

(OKC, ST 468, ST 268, ST 168, ST 811, ST 711)

Setup2

usable with all OKC machines (starting with V 2.1)

Converting

Setup2 --> 1

Possible with M1plus (starting with V. 5.2) only.

Example:
How to convert a Setup2 patter for a CMS 530 to a pattern

for a CMS 330:
1. Load the pattern and call up the "Change Machine/

Gauge/Setup Type..." menu.

2. Set the corresponding setup type for the machine in the

"Machine Explorer".

3. Start technical processing.

4. Run the "Generate MC Program..." function.
5. Run the "Extract MC Program..." function.



The sin; jac and set files will be generated.

Converting

Setup1 --> 2

Setup1 patterns cannot be converted automatically into

Setup2.
Example:
How to convert a Setup1 pattern for a CMS 330 to a Setup2

pattern for a CMS 530:
1. Load the pattern and call up the "Change Machine/

Gauge/Setup Type..." menu.

2. Set the corresponding setup type for the machine in the

"Machine Explorer".

3. Modify and complete the parameters and functions

corresponding to Setup2.

4. Start technical processing.

5. Run the "Generate MC Program..." function.
6. Run the "Extract MC Program..." function.



The sin; jac and setx-files will be saved to a zip-file.

Summary of Contents for CMS 502 HP+



















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands

Stoll CMS 502 HP+, Operating Instructions Manual

Search results

Summary of Contents for CMS 502 HP+

Reviews:

Related manuals for CMS 502 HP+

Brands by name

Popular brands