Notes on Safety
Commissioning Instructions Bottom brake resistor
3
ID 441806.03
WE KEEP THINGS MOVING
1
1
Notes on Safety
The devices may cause risks. For these reasons, comply with the following:
•
The safety notes listed in the following sections and points
•
The technical rules and regulations.
In addition, always read the appropriate documentation. STÖBER ANTRIEBSTECHNIK GmbH + Co. KG
accepts no liability for damages caused by non-adherence to the instructions or applicable regulations.
Subject to technical changes to improve the devices without prior notice. This documentation is purely a
product description. It does not represent promised properties in the sense of warranty law.
1.1
Component part of the product
The technical documentation is a component part of a product.
•
Since the technical documentation contains important information, always keep it handy in the vicinity of
the device until the machine is disposed of.
•
If the product is sold, disposed of, or rented out, always include the technical documentation with the
product.
1.2
Operation in accordance with its intended use
The BR 5000 chassis brake resistors are only suitable for use on the POSIDRIVE® MDS 5000, POSIDRIVE®
FDS 5000 and POSIDYN® SDS 5000 inverters.
Unintended use includes use on other devices.
1.3
Qualified personnel
Since the devices may harbor residual risks, all configuration, transportation, installation and commissioning
tasks including operation and disposal may only be performed by trained personnel who are aware of the
possible risks.
Personnel must have the qualifications required for the job. The following table lists examples of occupational
qualifications for the jobs:
Activity
Possible occupational qualifications
Transportation and storage Worker skilled in storage logistics or comparable
training
Configuration
- Graduate engineer (electro-technology or
electrical power technology)
- Technician (m/f) (electro-technology)
Installation and connection
Electronics technician (m/f)
