Integrated Bus
Operation manual POSIDYN® SDS 5000
ID 442289.06
WE
KEEP
THINGS
MOVING
99
11
11.4.3
Administration of remote maintenance settings
Remote maintenance procedures are usually performed for different projects or in different networks and thus
with different settings. When only a simple switchover is needed, you can save the settings in a *.cfg file and
reload them when necessary.
You can save and load all settings that you make with the
Network and remote service
assistant. Please note
that the save and load procedures are performed separately for each of the assistant's tabs. After you have
processed the
Network settings
tab, you can use the Save as ... button to save the settings to a *.cfg file.
When you then save the settings of the
Activation remote service
tab to the same *.cfg file, the settings of the
tab are supplemented. The same applies to the
Internet proxy server
tab.
The settings saved in the assistant can be loaded with the
Load...
button. The load and save procedures must
be performed separately for each tab. If all data are stored in the same file, you can use the same file for each
load procedure.
Summary of Contents for POSIDYN SDS 5000
Page 194: ...Notes WE KEEP THINGS MOVING ...
