Introduction
Operation manual POSIDYN® SDS 5000
ID 442289.06
WE
KEEP
THINGS
MOVING
9
1
1
Introduction
Axis management is integrated in the inverter. This allows for the following operation modes:
•
Single axis operation:
An axis projected in POSITool is used for the connected motor.
•
Multi-axis operation:
2, 3 and 4 axes projected in POSITool are used for the connected motor. The axes can be used
sequentially as parameter sets on the motor.
•
POSISwitch multi-axis operation:
Up to 4 motors connected to POSISwitch are sequentially operated with up to 4 axes.
This option requires the following system structure.
The system of the 5th generation of STOBER inverters is divided into two ranges, the global and the axis
range. The global range includes programming and parameterization that relates to the inverter. This includes
the device controller, the setting of peripheral components such as braking resistors, etc. It is also responsible
for the administration of the axis range.
The axis range is divided into up to four axes. Each axis contains the programming and parameterization for
a motor and is selected from the global range. The axis range contains the motor setting and the application
of the motor. The applications are defined by STOBER in so-called applications or can optionally be freely
programmed by the user.
Fig. 1-1: Structure of the global and axis range
Axis 1
Global area
Axis areas
Axis 2
Axis 3
Axis 4
ESC
X3
I/O
#
Summary of Contents for POSIDYN SDS 5000
Page 194: ...Notes WE KEEP THINGS MOVING ...
