manualshive.com logo in svg

Stober POSIDYN SDS 5000, Operation Manual

Share
Download
Stober POSIDYN SDS 5000 Operation Manual Download Page 32

Parameterize

ID 442289.06

32

Operation manual POSIDYN® SDS 5000

4

WE 

KEEP 

THINGS 

MOVING

4.2

POSITool

The versatile interface between user and inverter is the POSITool software. It offers various possibilities for 

the configuration of an inverter.

POSITool has an interface to represent programming. In the “free graphic programming” option, blocks are 

linked and as a result a control sequence is realized.

STOBER also provides predefined applications for programming. This includes applications such as fast 

reference value application and command positioning that are selected using a wizard.

POSITool provides the user with parameter lists for parameterization. Using the lists, the control sequence is 

adapted to external conditions such as motor type, rotary encoder or bus systems. Limit values such as 

maximum speed are also defined or display values such as the current speed are shown.

The program and parameters are transferred to the inverter via a serial interface (RS232). Afterwards it starts 

processing. Here the user can observe the parameters via the serial connection. A scope function is available 

to record the different values over time for use in further diagnostics.

More details about the use of POSITool can be found in the corresponding section of the POSITool operating 

manual or programming manual (see section 1.3 Further documentation). 

4.3

Operator panel

The operator panel is used for monitoring and changing parameter values. The operator panel consists of a 

two-line display with 16 characters each and a keyboard. The keyboard has six keys for menu prompting and 

two keys for local operation.

Tab. 4-1: Operator panel

Jumps back to operator level.

Resets parameter value.

Enter key: Opens the menu level, menu groups and the 

parameters. Accepts a changed parameter value.

Selects a parameter in the menu group. During entry, 

increases/decreases the parameter value (positive/negative).

Selects the menu group. During entry, changes the decade 

(ones, tens, hundreds, etc.).

Activates/deactivates local mode (if programmed). In local 

mode, deactivation also deletes the enable.

Enable for local mode I/O 

(if programmed).

ESC

#

I/O

Summary of Contents for POSIDYN SDS 5000





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands