Stober POSIDYN SDS 5000, Operation Manual

Page: 112 / 196

Integrated Bus
ID 442289.06
112
Operation manual POSIDYN® SDS 5000
11
WE
KEEP
THINGS
MOVING
11.4.12 Diagnosis
The blue LED on the front of the inverter and the parameter A169 remote service advance (i.e., progress) give
you information on the status of the Internet connection:
Tab. 11-1: Diagnosis of the remote maintenance status
Parameter A170 remote service acknowledge (i.e., remote service response message) changes its value like
the blue LED on the front:
• 1: LED on
• 0: LED off
You can output this parameter on a binary output so that you can evaluate the signal of the blue LED.
The four bytes of parameter A178 contain the exit code, the status value, the error category and the error
value.
Another possibility is the parameter A178 error remote service . The parameter indicates a hexadecimal
number (length: 32 bits) showing the state of remote maintenance. Each of the four bytes stands for a
diagnostic value:
Indication in
A169
Blue LED Meaning
0:off Off Remote maintenance is not desired.
1:flash Flashing very quickly The connection to the teleserver is being established.
2:blink Flashing at regular
intervals
The device is waiting for the connection to POSITool.
3:on Continuously on The connection has been fully established and remote
maintenance can begin.
00 00 00 00
hex
The
specifies why
remote maintenance
was exited. Exit code The
indicates the error
within the error
category. error value
The
specifies the
status of remote
maintenance. status value The
stands for a group
of errors. error category