Stoane Lighting 50mm ADL CP.X Installation And Maintenance Instructions Download Page 1

Page: 1 / 4

Mike Stoane Lighting Ltd
20 Dryden Road Bilston Glen Ind Est.
Loanhead Midlothian EH20 9LZ UK

T: +44 (0) 131 440 1313

F: +44 (0) 131 440 0049

www.mikestoanelighting.com

VAT No GB682885284

Limited Company 188910

50mm ADL CP.X

Installation and Maintenance

Instructions

IMPORTANT: All wiring connections must be made before switching on mains power.

European Conformity

Please retain these instructions for future reference

This product should not be disposed of in your general waste

Not suitable for covering with thermally insulating material

Class III - Extra Low Voltage

Indoor Use Only

IP20

Xicato LED Module

50mm ADL CP X.pdf 1 11/12/2019 12:49:26

Summary of Contents for 50mm ADL CP.X

Page 3: ...cure To Remove the Cover Plate Rotate 90 Use a screwdriver or similar in the slot to prise off the plate Use caution do not damage the paint Slot 90 Pan Tilt locking Tightening the installation screws will swing out the tabs which clamp ceiling surface from behind retaining the fitting To LED driver Ø92mm cut out 50mm ADL CP X pdf 3 11 12 2019 12 49 26 ...

Page 4: ...d lumen output can be found on the product label on the fitting To Add Remove accessories Isolate the fitting from the supply and allow to cool Step 1 Remove the circlip and any accessories Step 2 Remove the optic Step 3 Replace optic and accessories as required and secure with circlip 50mm ADL CP X pdf 4 11 12 2019 12 49 26 ...