12
Installation Cont.
Affixing the Hob
Once the sealing tape has been installed around the underside of the cooktop, carefully turn it back over and
gently lower it into the aperture hole that has been cut out. Push it down gently so that the cooktop is resting
firmly on the cabinet/benchtop surface.
• Secure the cooktop in position using the mounting clamps supplied.
• There are four mounting points (1,
2,
3,
4) on the cooktop base to affix the clamps (Fig. 6).
• Put the clamps in the location as indicated above in Fig 6 and using the screws provided, affix the clamps
(Fig. 7, B) to the cooktop and tighten the screws (Fig. 7, C) securely shown in Fig. 7. This is very important.
The other side of the clamp must be located on
the underside of the bench top, as seen in Fig. 7.
Fig. 6
Fig. 7
1
2
4
3
SGCSW75S
CT C
XXXXX 12 2016
Gas Inlet Connection
SGCW75S
CT C
56582 04 2017
