Stinger bacharach, Instruction Manual

Page: 8 / 25

8
Description of Features, Con’t.
Power Switch
When in the ON position, this switch
starts the recovery operation by
turning ON the compressor.
Two Circuit
Breakers
Protects the
STINGER from
over current.
Power Cord
(Note: 230 VAC units have
a male IEC 60320 type
plug that requires the use
of a customer supplied
power-cord adapter)
Connector for optional 80% tank
full shutoff cord
(PN 2090-0091/
Kit: PN 2090-0091)
This optional accessory connects
to a DOT recovery cylinder’s
overfill sensor. It automatically
shuts the STINGER off when the
recovery cylinder reaches 80% of
its liquid-fill limit.
Note : If this option is installed, the
STINGER will not operate unless it
is connected to a recovery cylinder
with a compatible level-float switch.
If the recovery cylinder doesn’t
have a float switch, a shorting cap
must be installed on the shutoff
cord.
Storage Pocket
This heavy-duty storage pocket is
used to store the Operation
Manual, the Warranty Card and
the original invoice. These items
should be kept with the unit at all
times.
Rear Panel