background image

State: 19.09.2017 p.  5

Mounting instruction climbing equipment „Tamino 2“

Item-No. 51 5560 601

©  stilum GmbH, 56271 Kleinmaischeid  •  Tel. +49 (0) 2689 92790-0  •  All rights and product modifications reserved

12. Seal the foundation with the safety cover required for the height of fall  

indicated.  

Critical drop height: 800 mm.  

 

 

 

 

Recommended surface material: grass, sand, wood chip, gravel, 
synth. fall protection. 

13. Do not allow children to use the equipment before the installation has 

been finished.

14. After 3 months, check the screws at the joints and retighten them if 

necessary.

Attention:

 If the play equipment has been incompletely installed or partly 

dismantled when carrying out maintenance and repair work, this may 
lead to
particular risks of injury for the user. For this reason, make clearly visible 
that the equipment shall not be used in such cases.
 

NOTE: 

Play equipment, which contain components made of stainless 

steel should not come with „normal“ steel parts in contact. Those steel 
parts may rub off and leave small steel particles in combination with 
moisture brown rust stains. If such corrosion occur on stainless steel 

parts, they are fine to remove with an abrasive (240 grit).

Please take care when transporting and setting up the fact that the com-
ponents are made of stainless steel with no „normal“ steel parts in contact.

With every playground equipment with wooden parts might occur desica-
tion cracks caused by the weather. These desication cracks are admissi-
bly according to the EN 1176 Bbl 1:2009-1, 4.2.7.6.

Diagram 4: Minimum space „Tamino 2“

R1500

R1500

6250

1500

3000

10200

OHNE SCHRIFTLICHE ZUSTIMMUNG DER KAISER GMBH DARF DIESE 

TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER 

ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER- 

WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

Oberflächen nach

DIN ISO 1302

Reihe 2

Zul. Abweichung

DIN 2768 - mH

1

 

Tamino 2

Benennung

Gepr.

Werkstoff

Blatt

Datum

Projekt

Gez.

Zuschnitt

Zeichnungsnummer

Rev

Änderung

Datum

1:50

A3

Gewicht

Name

Name

Draufsicht

1013-00-00

867.7

Maßstab

Behnke

23.0617

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gewerbegebiet Larsheck

56271 Kleinmaischeid

Deutschland

Reviews: