© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. +49 (0) 2689 92790-0 • All rights and product modifications reserved.
Mounting instructions for cableway „funis“
Item No. 517021101
State: 10/10/2014 · S. 2
· MS/TSA
Mounting instructions for cableway „funis“
Foundation
Diagram 2: Side view with dimension details of „funis“
Diagram 3: Top view
Play level
Brake spring
Brake spring
Extent of the minimum zone =
safety area
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 34000 x 4000 mm).
2. Carry out excavation work for 2 foundations as shown in Diagram 2.
3. After excavation, compress the foundation floor.
Note
: The cableway is only
available with an installation depth of 450 mm. Pay attention to items marked
„game level“ of play equipment!
4. Set up concrete foundations in the dimensions indicated (LxWxH 3400 x
1200 x 600 mm) and integrate reinforcement as shown in the plan (see plan)
in the quality class B 25. Insert the pre-mounted cable car into the foun-
dations in accordance with the dimensions indicated. Make sure that the
concrete between the tubes of the poles is also compressed properly (see
Reinforcement Plan).
No warranty for damage to backwater or condensation in the tube. Adequate
drainage in the foundation is necessary.
5. Align the cable car horizontally and vertically and keep it supported until the
foundations have completely set.
Note:
Do not allow children to use the cable
car as long as it is supported.
6. After a setting period of 10-14 days - depending on weather conditions and
foundation size - seal the foundation with the safety cover required for the
height of fall indicated. Set up impact-absorbing playground surfacing accor-
ding to EN 1177 HIC 1000.
