Geode H14000 User Manual
27
2) After aborting an experiment, a Good Laboratory Practice (GLP) report can be generated by
pressing the
“validation icon”
on the display. To avoid the generation of a GLP report, press
the
“cross icon”
. To avoid the generation of GLP reports in the future, press the
“double cross
icon
”
.
GLP reports are accessible through “Reports” in the main panel and can be exported on a USB
key.
Import or export a program
To import a program from a USB key:
1) Plug a USB key in the USB port at the front of the instrument.
2) Wait for the pop-up indicating that the USB key has been recognized, then press the
“validation
icon
”
.
3)
In the main panel, press “Programs”, then the “open icon”
. Select the desired program(s)
(in “usb”) to be imported (to select multiple programs, check the box “multiple selection”).
4) Press on the
“copy icon”
on the right side, a new page is displayed.
5) Press
on the “local/scripts” folder on the right panel.
6)
Press the “validation icon”
.
To export a program on a USB key:
1) Plug a USB key in the USB port at the front of the instrument.
2) Wait for the popup indicating that the USB key has been recognized, then
press the “validation
icon”
.
3) In the main panel,
“Programs”, then the “open icon”
. Select the desired program(s) (in
“local/scripts” or “/templates”) to be exported (to select multiple programs, check the box “multiple
selection”).
4) Press on the
“copy icon”
on the right side, a new page is displayed.
5) Press
on the “usb” folder on the right panel, and potentially select a subfolder in the “usb”
folder as the output directory.
7)
Press the “validation icon”
.
Export Live Logs or system logs for troubleshooting support
To export the
“Live Logs” of the last run program:
As soon as the program ends, do not run another program, or shut down the instrument
(otherwise the Live Logs are erased).
1) Plug a USB key in the USB port at the front of the instrument.
