Still Tugger train Autarkic E Frame, Original Instructions Manual

Page: 34 / 144

4
Overviews
Description
Autarkic E frame
The autarkic E frame is a device for picking
up and transporting roller platforms, known as
trolleys.
Two or four E frames are connected to a tow
tractor. These E frames can transport trolleys
loaded with crates, pallets or similar to the
desired workplace.
The E frames are lifted by the integrated
hydraulic system on the autarkic E frame.
When the accumulator is fully charged, the
E frame can be lifted twice by actuating the
ejector.
The required energy is supplied by a hydraulic
unit that is installed under the E frame. The
accumulator on the hydraulic unit is charged
during travel. The hydraulic unit therefore
has the required energy to lift and lower the
autarkic E frame. The accumulator must
then be recharged. Driving the tugger train
recharges the accumulator. The pressure
required to lift the frame is generated over a
distance of < 20 m, depending on the ground
conditions.
The trolleys are raised by 40 mm for trans-
portation.
When the trolley is inserted, it is automatically
secured against rolling out.
Tugger trains with the autarkic system are
always equipped with an articulated steering
system (rigid hinged tiller) for stability
reasons. They can consist of two or four E
frames (maximum total load of 4 t across the
entire train).
28 50988012117 [EN]