Still Tugger train Autarkic E Frame, Original Instructions Manual

Page: 125 / 144

Servicing
6
Service work (C frames)
– Perform a visual inspection of the hydraulic
hoses on the C frame in order to identify
wear points or porous areas.
– If damaged, replace the hydraulic hoses
and gaskets.
Hose lines must be replaced if:
• The outer layer is damaged or becomes
brittle and cracks begin to form
• They are leaking
• There are any unnatural deformations (e.g.
bubble formation or buckling)
• A fitting is detached from the hose
• A fitting is heavily damaged or corroded
Pipes must be replaced if:
• There is abrasion and a loss of material
• There are any unnatural deformations and
bending stress is detected
• They are leaking
Checking the lifting function
Checking the lifting function
WARNING
Hydraulic fluid is pressurised during operation. It is
hazardous to your health.
– Do not allow the fluid to come into contact with
the skin.
– Avoid inhaling spray.
– Penetration of hydraulic fluids into the skin is
particularly dangerous if these fluids escape
at high pressure due to leaks in the hydraulic
system. In case of such injury, immediate
medical assistance is required.
50988012117 [EN] 119