Still Tugger train Autarkic E Frame, Original Instructions Manual

Page: 122 / 144

6
Servicing
Safety regulations for maintenance
Safety regulations for maintenance
General information
General information
To prevent accidents during service work and
inspections, all necessary safety measures
must be taken, e.g.:
• Place the frames on which service work or
repair work is to be performed on a level
surface in a cordoned-off, safe location.
• Secure the frames to prevent them from
rolling away during all service work and
repair work.
• Place the frames on which service work or
repair work is to be performed on a solid,
level surface.
• Jack up the frames in a horizontal position
so that both wheels rotate freely and it
is possible to work while maintaining an
ergonomic posture.
Safety devices
After service work and repair work, all safety
devices must be reinstalled and checked to
ensure that they are in working order.
Maintenance instructions
Maintenance work must be carried out in ac-
cordance with the following maintenance in-
tervals. The intervals are defined for standard
use. Shorter maintenance intervals can be
defined in consultation with the operating
company, depending on the application con-
ditions of the tow tractor/frame.
The following factors may necessitate shorter
maintenance intervals:
• Dirty, poor-quality roadways
• Dusty or salty air
• High levels of air humidity
• Extremely high or low ambient tempera-
tures, or extreme changes in temperature
• Multi-shift operation with a long operating
time
116 50988012117 [EN]