Still SXH-20, Original Instructions Manual

Page: 91 / 126

Lifting the truck
DANGER
Danger of swinging
Truck lifting must be performed carefully.
For certain types of work, it is necessary to lift
the truck:
–
Use a jack with adequate lifting capacity.
Front section of the truck:
–
Place the jack under the chassis (1).
For work on the lifting device:
–
Position the jack under the battery frame
(2).
Servicing the load wheels:
–
To service the load wheels, the jack must
be positioned under the load arms in the lo-
cations indicated (3).
As a safety precaution, always insert a wood-
en chock.
WARNING
Risk of truck falling
Immobilise and chock the truck after lifting it.

Transporting the truck
CAUTION
Always switch off the ignition and disconnect the bat-
tery.
Never tie down or sling the truck by the control unit
or other points not designed for this.
CAUTION
Risk of damage to the truck.
Use a hoist and woven NON METALLIC slings with
an adequate lifting capacity. Refer to the load weight
shown on the truck's capacity plate.
The lifting operations must be performed by qualified
personnel.
Trucks are generally transported by road or by
rail.
The truck must be suitably protected from the
effects of the weather during transport and
storage.
To load or unload the truck, use an inclined
plane or a mobile ramp.
If the truck is out of service or if the battery
has been removed, sling the truck. See Chap-
ter 4 Slinging the truck.
Use
4
Handling the truck in specific situations
81 11548011551 EN - 02/2021 - 07