Still SXH-20 Original Instructions Manual Download Page 61

Page: 61 / 126

Using the truck on a slope

NOTE

Misuse of the truck on a slope is strictly pro-

hibited. It places particular stress on the trac-

tion motor, brakes and battery.

CAUTION

Risk of tipping
Slopes must always be approached with great cau-

tion:

–

Avoid slopes with a gradient greater than that

specified in the datasheet for the truck.

–

Make sure that the ground is clean, has a non-slip

surface and that the route is clear.

–

Always drive at a very low speed and brake grad-

ually.

Travelling up slopes

Always travel up slopes in reverse. The load

faces uphill.
Without a load, we recommend that you go up

a slope forwards.



Use

Driving

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands