Still SXH-20 Original Instructions Manual Download Page 57

Page: 57 / 126

Driving

Defining directions

On a pallet truck equipped with a steering

wheel and a control module, the conventional

directions are:

●

Forward travel (2): Opposite load arms di-

rection/Forklift operator direction

●

Reverse travel (1): Load arms direction

Driving

WARNING

Be aware of the position of the drive wheel
Slowly start the truck.
Check the position of the drive wheel on the display.

NOTE

Always operate the drive switch slowly, as the

truck reacts immediately. Abrupt starts, brak-

ing or reversal of drive direction must be avoi-

ded at all costs.

The drive switch is located on the control unit.

NOTE

Always keep both hands and both feet inside

the driver's compartment while the truck is

moving.



Use

Driving

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands