Still SXH-20 Original Instructions Manual Download Page 54

Page: 54 / 126

Settings menu

It is possible to access different settings

through the Settings menu.

–

Select the Settings menu (1).

This menu allows access to a drop-down

menu consisting of:

●

Language

●

Unit

●

Date format

●

Date

●

Time

●

Adjust the contrast

●

Adjust the brightness

–

Select the desired choice.

Error codes menu

It is possible to access the error messages

that disrupt the truck’s operation.

–

Select the error messages menu (1)

The operator has access to the error codes. If

several codes are affecting the truck, the oper-

ator can scroll through several successive dis-

plays.
The number of error messages is indicated at

the bottom of the display (2).



Use

Using the display-operating unit

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands