Still SXH-20 Original Instructions Manual Download Page 114

Page: 114 / 126

Permanent Putting Out of Commis-

sion (Destruction)

When scrapping the truck, it is necessary to:

–

Remove the various parts of the truck (cov-

ers, battery, chains, motors etc.)

–

Sort out the components depending on their

type: pipes, rubber components, lubricants,

aluminium, iron etc.

–

Before scrapping the truck, notify the com-

petent authorities of your country in writing.

–

After receiving the authorisation from the

competent authorities, remove any compo-

nents according to national standards.

NOTE

The client is solely responsible for any irregu-

larities he has committed during or after the

scrapping of the truck's components and the

removal of components.

Maintenance

Storage and decommissioning

104

11548011551 EN - 02/2021 - 07

Summary of Contents for SXH-20































































































































Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands

Still SXH-20, Original Instructions Manual

Search results

Summary of Contents for SXH-20

Reviews:

Related manuals for SXH-20

Brands by name

Popular brands