Hydraulic systems
Checking the hydraulic system for
leaks
–
Switch off the truck and disconnect the bat-
tery connector.
–
Open the technical compartment door.
–
Inspect the hydraulic system: pipes, hoses
and connections between the pump-motor
unit and the cylinders.
–
Check the cylinders for leaks.
–
Check that the hoses are attached correctly
and show no signs of friction wear.
–
Check the external pipes and hoses on the
technical compartment.
–
Close the technical compartment door.
–
Return the truck to service.
CAUTION
Risk of damaging the truck
In the event of leakage, please contact the After-
Sales Service Centre.
Checking the hydraulic oil level
To check the hydraulic oil level, proceed as
follows:
–
Immobilise the truck.
–
Lower the forks.
–
Switch off the ignition and remove the key.
–
Press in the emergency off switch.
–
Disconnect the battery connector.
Maintenance
5
Hydraulic systems
101
11548011551 EN - 02/2021 - 07
Summary of Contents for SXH-20
