Operation
4
Procedure in emergencies
ing) does not function. The truck must be
decelerated with the mechanical brake by
pressing the brake pedal
• No hydraulic functions are available
6321_003-142
1
– Press the emergency off switch (1).
The truck will roll to a stop in drive mode.
– Brake the truck to a standstill by actuating
the brake pedal.
7090_001-005
Procedure if truck tips over
DANGER
If the truck tips over, the driver could fall out and
slide under the truck with potentially fatal conse-
quences. There is a risk to life.
Failure to comply with the limits specified in these
operating instructions, e.g. driving on unacceptably
steep gradients or failing to adjust speed when
cornering, can cause the truck to tip over. If the
truck starts to tip over, do not leave the truck under
any circumstances. This increases the danger of
being hit by the truck.
– Do not release your seat belt.
– Never jump off the truck.
– You must adhere to the rules of behaviour if the
truck tips over.
Rules of behaviour if truck tips over:
– Hold onto the steering wheel with your
hands.
– Brace your feet in the footwell.
– Bend your upper body over the steering
wheel.
57348011800 EN - 11/2018
289
Summary of Contents for RX70 Series
