Operation
4
Testing and activities before daily use
5060_003-031
1
Checking the steering system for
correct function
DANGER
If the hydraulics fail, there is a risk of accident as the
steering characteristics have changed.
– Do not operate the truck if it has a defective
steering system.
– Operate steering wheel (1). The steering
play while stationary must not be more than
two finger widths.
NOTE
If the truck is switched on with the steering
wheel turned, the maximum driving speed is
limited. Travel speed limitation is removed
as soon as the steering wheel is moved out
of a cornering position into the straight-ahead
position. This requires a change in steering
angle of about half a revolution.
Checking the emergency off function
NOTE
Only trucks with a joystick 4Plus (variant) have
an emergency off switch.
WARNING
No electric braking assistance is available when the
emergency off switch is actuated!
Actuating the emergency off switch will de-energise
the drive unit. The truck will not be held on a slope
by the electric brake.
– Use the emergency off switch only if there is a
risk of fire or to carry out a functional test.
– Brake the truck by depressing the brake pedal.
57348011800 EN - 11/2018
91
Summary of Contents for RX70 Series
