4
Operation
Testing and activities before daily use
7331_341-002
Using the driver's cab
DANGER
Risk of fatal injury in the event of falling from the
truck if it tips over!
In order to prevent the driver from sliding under-
neath the truck and being crushed if the truck tips
over, a restraint system must be in place and must
be used. This will prevent the driver from falling out
of the truck if it tips over. The driver's cab constitu-
tes a driver restraint system only if the cab door is
sturdy and closed. Fabric-covered cabs (variant)
with doors made of plastic or canvas do not consti-
tute a driver restraint system and offer no protection
from the consequences of the truck tipping over!
– Close the cab door before operation.
– If the door is open or has been removed, use a
comparably secure restraint system.
– We recommend that you always use the seat
belt.
Checking the brake system for
correct function
DANGER
Risk of accident due to failure of the brake system!
If the brake system fails, the truck will be insuffici-
ently braked or will not be braked at all.
– Do not commission trucks with a defective brake
system.
88
57348011800 EN - 11/2018
Summary of Contents for RX70 Series
