Still RX70-16, Original Instructions Manual

Page: 358 / 380

5
Maintenance
1000-hour maintenance / Annual maintenance
1 2 3
7094_842-001
Checking the fork arms
– Check the fork arms (1) for visible deforma-
tion and excessive wear.
Wear must not amount to more than 10% of
the original thickness.
– Check the fork latch (3) for correct opera-
tion.
– Check that the locking screw (2) is secured
and cannot fall out of the fork arms.
– Replace any worn or deformed fork arms.
CAUTION
Fork arms must not be uneven!
– Always replace both fork arms.
Checking the reversible fork arms
NOTE
This check is only required for reversible fork
arms (variant).
– Check the outside of the fork bend (1) for
cracks. Contact your service centre.
346 174749 EN - 03/2017