![Still RX70-16 Original Instructions Manual Download Page 349](http://html.mh-extra.com/html/still/rx70-16/rx70-16_original-instructions-manual_1380019349.webp)
Maintenance
5
Remaining ready for operation
7311_003-019
1
– Unscrew breather filter with oil dipstick (1).
7094_700-002
1
2
– Check the oil level. The oil level must be at
least up to the mark (2) on the dipstick.
– If the oil level does not reach the specified
level, pour hydraulic oil of the corresponding
specification (see ⇒ Chapter "Maintenance
data table", P. 5-314) into the filler neck until
it reaches the upper marking as a maximum.
NOTE
Use a funnel.
– Screw in the breather filter with oil dipstick.
– Close bonnet again.
ENVIRONMENT NOTE
Carefully collect up any spilled oil and dispose
of it in an environmentally friendly manner.
Checking the hydraulic system for
leaks
WARNING
Hydraulic oil under pressure can
escape from leaking lines and cause
injuries to the skin.
Wear suitable protective gloves,
industrial goggles etc.
174749 EN - 03/2017
337
Summary of Contents for RX70-16
