Still RX70-16, Original Instructions Manual

Page: 230 / 380

4
Operation
Auxiliary equipment
The description and operation information can
be found in the separate operating instructions
for the corresponding FleetManager versions.
Shock recognition (variant)
The shock recognition is an equipment variant
of the FleetManager (variant) in which an
acceleration sensor is installed in the truck.
The acceleration sensor records data arising
from rapid accelerations or decelerations of
the truck, e.g. in the event of an accident.
This data can be electronically read out and
evaluated.
– If you have any questions, please contact
your authorised service centre.
Cruise control (variant)
Using the cruise control function, the driver
can save the speed in forwards travel when it is
> 6.0 km/h by pressing a button, and continue
driving without actuating the accelerator
pedal.
NOTE
The cruise control function cannot be used for
reverse travel or when travelling at speeds of
< 6.0 km/h.
Depending on the truck equipment, the cruise
control can be switched on and off via the drive
direction switch or the display and operating
unit.
218 174749 EN - 03/2017