Still RX70-16, Original Instructions Manual

Page: 159 / 380

Operation
4
Lifting
Tilting the lift mast forwards with the "lift
mast vertical position"
6210_003-067_V2
2 1
– Actuate the button (1) to switch on the "lift
mast vertical position" comfort feature; the
function display (2) in the display shows the
activated status.
– Tilt the lift mast forwards.
NOTE
The way in which the lifting system is operated
depends on the operating devices included in
the truck's equipment; see the chapter entitled
"Lifting system operating devices".
6210_003-069_en_V2
1
The lift mast is tilted forwards and stops as
soon as the vertical position is reached. The
arrow above the bar shown on the screen of
the display and operating unit represents the
"lift mast vertical position".
Tilting the lift mast forwards beyond the
vertical position:
– Release the operating device for tilting and
actuate again.
The lift mast is tilted beyond the vertical
position up to the end stop. The current mast
tilt is shown in the display and operating unit.
– To deactivate the "lift mast vertical position",
actuate the button (1) again.
Tilting the lift mast backwards with the
"lift mast vertical position"
– Tilt the lift mast backwards.
The lift mast is tilted backwards without
stopping in the vertical position.
174749 EN - 03/2017 147