Still RX70-16, Original Instructions Manual

Page: 158 / 380

4
Operation
Lifting
6210_003-069_en_V2
1
Display of the "lift mast vertical position"
The driver can see the mast tilt on the display
and operating unit screen. The bar in the
display shows the current mast tilt relative
to the "lift mast vertical position". The arrow
above the bar marks the vertical position of the
lift mast.
Automatic approach towards the "lift
mast vertical position"
6210_003-067_V2
2 1
– Switch on the "lift mast vertical position"
comfort feature via the button (1) on the
display and operating unit.
– Tilt the lift mast forwards using the corre-
sponding operating device. The lift mast
stops automatically as soon as the prese-
lected setting is reached for the "lift mast
vertical position".
If the comfort feature is switched off, the lift
mast tilts forwards past the "lift mast vertical
position" without stopping.
If the lift mast is tilted backwards, it moves
past the "lift mast vertical position" without
stopping, regardless of whether the comfort
feature is switched on or not.
Gentle running-in to the end stops
The lift mast is braked gently at the end of the
tilt range. This prevents the lift mast from
stopping harshly in the end position and
reduces severe oscillating motions of the
truck.
146 174749 EN - 03/2017