Still RX60-60, Original Instructions Manual

Page: 165 / 408

The lift mast is tilted forwards and stops as
soon as the vertical position is reached. The
arrow above the bar shown on the screen of
the display and operating unit represents the
"lift mast vertical position".
Tilt the lift mast forwards beyond the vertical
position:
–
Release the operating device for tilting and
actuate again.
The lift mast is tilted beyond the vertical posi-
tion up to the end stop. The current mast tilt is
shown in the display and operating unit.
–
To deactivate the "lift mast vertical posi-
tion", actuate the button (1) again.
Tilting the lift mast backwards with the
"lift mast vertical position"
–
Tilt the lift mast backwards.
The lift mast is tilted backwards without stop-
ping in the vertical position.
Possible restrictions on the "lift mast
vertical position"
In some circumstances, the lift mast cannot
move exactly into the preset vertical position.
Possible causes include:
●
Uneven ground
●
Bent fork
●
Bent attachment
●
Worn tyres
●
Severely deformed lift mast
The vertical position can be corrected by tilting
the lift mast using the relevant operating de-
vice. If the vertical position has to be corrected
frequently, the "lift mast vertical position"
should be calibrated.
6210_003-069_en_V2
1

Operating
4
Lifting
153 56358042501 EN - - 11