Still RX60-60, Original Instructions Manual

Page: 132 / 408

Softkeys for operating various
equipment variants
Additional functions can be displayed on the
display-operating unit. These additional func-
tions, e.g. a rotating beacon, can be switched
on and off using Softkeys.
Changing the Softkey functions:
A grey bar (3) highlights the Softkey column.
This is the right-hand column in the example
shown here. These additional functions can
now be switched on and off via the corre-
sponding Softkeys (2). The right-hand column
is only populated with additional functions if
the truck has more than three equipment var-
iants that can be switched on and off using
Softkeys.
In this case, proceed as follows to switch be-
tween the two columns:
–
Briefly press the Menu change button (1).
The grey bar jumps to the left-hand column.
These additional functions can now be switch-
ed on and off via the corresponding Soft-
keys (2).
NOTE
Press the Menu change button (1) for approx.
1 second to switch between the individual me-
nus on the display-operating unit.
NOTE
The additional functions depend on the indi-
vidual equipment of the truck and may vary
from those shown here.
Configuring Blue-Q efficiency
mode
The following operating modes can be selec-
ted to activate the Blue-Q efficiency mode:
1 2 3
ABE_Softkeytasten_V2

Operating
4
Operating the display-operating unit
120 56358042501 EN - - 11