![Still RX60-35/600 Original Instructions Manual Download Page 310](http://html.mh-extra.com/html/still/rx60-35-600/rx60-35-600_original-instructions-manual_1380018310.webp)
4
Operation
Procedure in emergencies
the truck using the mechanical brake, the
brake pedal must be pushed down further
• The truck can only be held on a slope using
the mechanical brake, not the electric brake
• No power steering effect; the steering
forces are increased by the remaining
emergency steering function
• The "Curve Speed Control" system (auto-
matic reduction in truck speed when cor-
nering) does not function The truck must be
decelerated with the mechanical brake by
pressing the brake pedal
• No hydraulic functions are available
7090_001-005
Procedure if truck tips over
DANGER
If the truck tips over, the driver could fall out and
slide under the truck with potentially fatal conse-
quences. There is a risk to life.
Failure to comply with the limits specified in these
operating instructions, e.g. driving on unacceptably
steep gradients or failing to adjust speed when
cornering, can cause the truck to tip over. If the
truck starts to tip over, do not leave the truck under
any circumstances. This increases the danger of
being hit by the truck.
– Do not release your seat belt.
– Never jump off the truck.
– You must adhere to the rules of behaviour if the
truck tips over.
Rules of behaviour if truck tips over:
– Hold onto the steering wheel with your
hands.
– Brace your feet in the footwell.
– Bend your upper body over the steering
wheel.
– Bend your body against the direction of the
fall.
296
171533 EN - 02/2019 - 19
Summary of Contents for RX60-35/600
