Operation
4
Lifting
ged. Otherwise, correct load measurement
cannot be guaranteed.
Fork extension (variant)
DANGER
There is a risk of being run over if the truck rolls
away and therefore a danger to life.
– Do not park the truck on a slope.
– Apply the parking brake.
– Change the fork extension in a separate, safe
location on a level surface.
WARNING
There is a risk of crushing!
The weight of the fork extension can cause crushing
or cuts on sharp edges or burrs.
– Always wear protective gloves and safety
footwear.
WARNING
There is a risk of tipping!
The weight and dimensions of the fork extension
affect the stability of the truck. The permissible
weights stated on the capacity rating plate must be
reduced in proportion to the actual load distance.
The truck is equipped with a fork extension ex
works, the capacity rating plate is already adjusted
accordingly.
– Observe load capacity, see the "Before picking
up a load" chapter.
NOTE
If the truck is equipped with the "load measu-
rement" comfort feature, a "zero adjustment of
the load measurement" must always be per-
formed after the fork extensions have been
changed. Otherwise, correct load measure-
ment cannot be guaranteed.
171533 EN - 02/2019 - 19
173
Summary of Contents for RX60-35/600
