Still RX60-35/600, Original Instructions Manual

Page: 113 / 470

Operation
4
Switching on
1 2
3 4
6341_003-006_V3
Standard display elements
1 Battery charge
The available battery capacity is shown
in the display field.
2 Drive program
The current traction program (1–5)
appears on the display.
3 Power rating
The average power consumption and
consumption trends are shown in the
display field.
4 Time
The current time appears in the display
field.
NOTE
After connecting the battery, the correct
charging state may not be displayed until
the battery is placed under load in the form of
driving or lifting operations.
Additional information may appear on the
display.
– If malfunctions occur, refer to the informa-
tion in the chapter entitled "Display mes-
sages".
Access authorisation with PIN code
(variant)
Description
Trucks equipped with the "Access authori-
sation with PIN code" variant are protected
against unauthorised use by a five-digit driver
PIN. Up to fifty different driver PINs can be
defined so that the same truck can be used
by different drivers, each with their own driver
PIN.
NOTE
The driver PINs are defined in a truck control
unit menu that can only be accessed by
persons with the corresponding access
authorisation, e.g. fleet managers.
171533 EN - 02/2019 - 19 99