Still RX60 35-50, Original Instructions Manual

Page: 75 / 596

Vibrations
The vibrations of the machine have been de-
termined on an identical machine in accord-
ance with the standards DIN EN 13059 "Safe-
ty of industrial trucks - Test methods for meas-
uring vibration" and DIN EN 12096 "Mechani-
cal vibration - Declaration and verification of
vibration emission values".
Frequency-weighted effective value of accel-
eration on the seat
MSG 65 driver's seat Uncertainty of meas-
urement
< 0.5 m/s
2
0.17
Tests have indicated that the amplitude of the
hand and arm vibrations on the steering wheel
or on the operating devices in the truck is less
than 2.5 m/s
2
. There are therefore no meas-
urement guidelines for these measurements.
The personal vibration load on the driver over
a working day must be determined by the op-
erating company at the actual place of use in
accordance with Directive 2002/44/EC, in or-
der to consider all additional influences, such
as driving route, intensity of use etc.
Observe the applicable national regulations in
non-EU countries.
NOTE
Please note the definition of the following re-
sponsible person: "operating company".
Safety
2
Emissions
59 56388011501 EN - 05/2022 - 08