Still RX60 35-50, Original Instructions Manual

Page: 523 / 596

General maintenance infor-
mation
Personnel qualifications
Only qualified and authorised personnel are
allowed to perform maintenance work. Regu-
lar safety checks and checks after unusual
incidents must be performed by a competent
person. The competent person must conduct
their evaluation and assessment from a safety
standpoint, unaffected by operational and eco-
nomic conditions. The competent person must
have sufficient knowledge and experience to
be able to assess the condition of a truck
and the effectiveness of the protective devices
in accordance with technical conventions and
the principles for testing trucks.
Maintenance personnel for batteries
Batteries must only be charged, serviced, and
replaced by personnel who have received ap-
propriate training in accordance with the in-
structions from the manufacturers of the bat-
tery, battery charger and truck.
–
Follow the handling instructions for the bat-
tery and the operating instructions for the
battery charger.
Maintenance work without special quali-
fications
Simple maintenance work, such as checking
the hydraulic oil level, may be carried out by
untrained personnel. A qualification of the type
held by a competent person is not required
to carry out this work. The required tasks are
described in the chapter entitled "Preserving
operational readiness".
Information for carrying out
maintenance
This section contains all the information re-
quired to determine when the truck requires
maintenance. Carry out maintenance work
within the time limits according to the hour
meter and using the maintenance check lists
Maintenance
5
General maintenance information
507 56388011501 EN - 05/2022 - 08