Still RX60 35-50, Original Instructions Manual

Page: 457 / 596

DANGER
Risk of explosion due to flammable
gases!
During charging, the battery releases a
mixture of oxygen and hydrogen (oxyhy-
drogen gas). This gas mixture is explo-
sive and must not be ignited.
There must be no flammable materi-
als or spark-forming operating materials
within 2 m of the battery charger and
the industrial truck when it is parked for
charging.
–
Take the following safety precautions
when working with batteries.
–
Keep away from open flames and do not
smoke.
–
Ensure that work areas are adequately ven-
tilated.
–
Disconnect the battery male connector be-
fore charging and only disconnect when
the industrial truck and battery charger are
switched off.
–
The battery door must remain open during
charging.
–
Expose the surfaces of the battery cells.
–
Do not place any metal objects on the bat-
tery.
–
Fully open any protective structures (e.g.
fabric-covered cab).
–
Have fire extinguishing equipment ready.
Battery weight and dimensions
DANGER
Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the stability
of the industrial truck. The weight ratios must not
be changed when replacing the battery. The battery
weight must remain within the weight range specified
on the nameplate.
–
Do not remove or change the position of ballast
weights.
–
Note the battery weight.
Operating
4
Handling the lead-acid battery
441 56388011501 EN - 05/2022 - 08