Still RX60 35-50, Original Instructions Manual

Page: 388 / 596

Opening and closing the 180°
cab door (variant)
WARNING
Risk of accident if the restraint system is not used.
If the truck has no restraint system other than the
cab door and seat belt, it is possible to fall out when
driving with the door open.
–
Always fasten the seat belt before driving with the
door open.
–
Only open and close the door or door sections
when the truck is stationary.
NOTE
If the door or door sections are opened while
driving, the message
Close cab door
appears. Depending on the setting, the truck
stops or limits the driving speed.
–
To remove the restriction, stop the truck
and close the door.
The 180° cab door can be swivelled up to
the counterweight and locked there. It is in-
tended for driving with the door open in high
outside temperatures. The door is split into
two and hinged by two sets of hinges. The
front door section (6) can be opened 180° and
locked in place. To do this, the front door sec-
tion (6) must be unlocked from the rear door
section (2), which remains closed when the
door is opened 180°.
How to open and close the entire cab door is
described first.
Opening the cab door from the outside:
–
Insert the key in the door lock (8), unlock
the door and remove the key.
–
Pull the door handle (7) and open the cab
door by pulling it outwards.
The cab door is held in the open position by a
gas spring.
Opening the cab door from the inside:
–
Take hold of the handle (5) and the latch
(4).
6301_003-161
4 5 6 7 8
1
3
2

Operating
4
Cab
372 56388011501 EN - 05/2022 - 08