Still RX60 35-50, Original Instructions Manual

Page: 103 / 596

Adjusting the steering column
–
Pull up and hold the lever (2) for steering
column adjustment.
–
Position the steering column (1), then push
the lever down again and allow the steering
column to engage.
DANGER
Risk of accident!
–
Ensure that the steering column is positioned se-
curely.
The steering column must click into place.
Never adjust the steering column while driving.
Adjusting the swivelling display-
operating unit
If the truck is equipped with multi-lever opera-
tion, the display-operating unit is swivel-moun-
ted on the right A-pillar.
The display-operating unit can be swivelled
from the neutral position to 15° to the left,
right, up and down. The unit cannot rotate
around its own axis.
To change the resistance for adjusting the dis-
play-operating unit, there are two socket head
screws (2) on the support for the display-op-
erating unit. The hexagon socket wrench for
emergency lowering can be used to loosen or
tighten the socket head screws (2).
–
Loosen the socket head screws (2) as re-
quired.
–
Hold the display-operating unit (1) in place.
–
Adjust the display-operating unit (1) so that
it can be read without glare.
–
Tighten the socket head screws (2) as re-
quired.
6219_003-012_V2
1
2

1
2
2
6219_003-235

Operating
4
Checks and tasks before daily use
87 56388011501 EN - 05/2022 - 08