Still RX60-25, Original Instructions Manual, Page: 97 / 470

Operation
4
Checks and tasks before daily use
7311_003-048
1
2
3
Fastening the seat belt
DANGER
Risk to life when driving without a seat belt!
If the truck tips over or crashes into an obstacle
and the driver is not wearing the seat belt, the driver
may be thrown from the truck. The driver could slide
under the truck or collide with an obstacle.
There is a risk of fatal injury!
– Fasten the seat belt before every trip.
– Do not twist the seat belt when fastening it.
– Only use the seat belt to secure one person.
– Have any malfunctions repaired by the authori-
sed service centre.
NOTE
The buckle has a buckle switch (variant). In
the event of an operating error or malfunction,
the message
SAFETY BELT
appears in the
display and operating unit, see the chapter
entitled "Display messages".
– Pull the seat belt (3) out of the belt retractor
without jerking and fasten closely around
the body over the thighs.
NOTE
Sit as far back as possible so that your back
is leaning against the seat backrest. The
automatic blocking mechanism permits
sufficient freedom of movement on the seat.
– Click the belt tongue (2) into buckle (1).
– Check tension of the seat belt. It should be
close to the body.
56338011803 EN - 02/2019 - 09 83
www. duma -rent.com