Still RX60-25, Original Instructions Manual

Page: 69 / 470

Safety
2
Emissions
Vibrations
The vibrations of the machine have been
determined on an identical machine in ac-
cordance with the standards DIN EN 13059
"Safety of industrial trucks - Test methods
for measuring vibration" and DIN EN 12096
"Mechanical vibration - Declaration and verifi-
cation of vibration emission values".
Frequency-weighted effective value of accel-
eration on the seat
MSG 65 driver's seat
Measurement
uncertainty
< 0.7 m/s
2
0.21 m/s
2
Tests have indicated that the amplitude of the
hand and arm vibrations on the steering wheel
or the operating devices in trucks is less than
2.5 m/s
2
. There are therefore no measure-
ment guidelines for these measurements.
The individual vibration load on the driver
over the course of a working day must be
determined by the operating company in
accordance with Directive 2002/44/EC at the
actual place of use, to ensure that all additional
factors, such as the driving route, intensity of
use etc., are considered.
NOTE
Please observe the definition of the following
responsible person: "operating company".
56338011803 EN - 02/2019 - 09 55
www. duma -rent.com