Still RX60-25 Original Instructions Manual Download Page 453

Page: 453 / 470

Technical data

Information about the lead-acid battery

Information about the

lead-acid battery

CAUTION

The battery weight and the battery dimensions

affect the stability of the truck.
When replacing the battery, the weight ratios

must not be changed. The battery weight must

remain within the weight range speciﬁed on the

nameplate. The location of ballast weights must not

be changed. The bottom of the battery tray must be

closed.

– Use batteries that meet DIN standards.
– Do not change the position of ballast

weights.

– Check the battery weight against the

information on the nameplate.

– Only use a battery tray that is closed at the

bottom.

– The battery weight can be found on the

nameplate of the battery.

NOTE

Battery speciﬁcations according to DIN 43536;

cells in accordance with DIN EN 60254-2,

80-V circuit B.

RX60-25 (6345), RX60-25/600 (6346), RX60-30 (6353)

Battery compartment dimensions [mm]

Battery

designation

Capacity

[Ah]

Depth

Width

Height

Tray

4 PzV 480

480

4 PzW 560

HAWKER

wf 200plus

560

4 PzS 560

560

4 PzS 620

620

4 CSM 640

640

TENSOR

TCSM 1235

640

1028

711

784

234

56338011803 EN - 02/2019 - 09

439

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 453 / 470

Search results

Summary of Contents for RX60-25

Reviews: