Still RX60-25 Page 430 Original Instructions Manual Download

Page: 430 / 470

Maintenance

1000-hour maintenance/yearly maintenance

6210_842-002

Checking fork arms

– Inspect the fork arms (1) for any visible

deformation. The wear must not amount to

more than 10 % of the original thickness.

CAUTION

Worn fork arms should always be replaced in pairs.

– Check the securing mechanism (3) for

proper operation.

– The locking screw (2) that prevents dislodg-

ing must be present.

Checking the reversible fork arms

NOTE

This check is only required for reversible fork

arms (variant).

– Check the outside of the fork bend (1) for

cracks. Contact your service centre.

416

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands