Still RX60-25 Page 427 Original Instructions Manual Download

Page: 427 / 470

Maintenance

1000-hour maintenance/yearly maintenance

Lubricating the slide elements

6321_003-124

6321_003-125

Lubricating the slide elements

– Extend the battery with the hydraulic

battery carrier and remove the battery, see

⇒ Chapter "Replacing the battery with the

hydraulic battery carrier", P. 4-345.

– Remove dirt and contaminated lubricant

residues.

– Lubricate the slide elements and guide rails

(2) and (3) in accordance with the mainte-

nance data table (see ⇒ Chapter "Mainte-

nance data table", P. 5-386.

– Reinstall the battery.

Oiling the catch rails

WARNING

Risk of injury!
If the battery carrier is not at a sufﬁciently safety

distance from mechanical components when it is

actuated, hands or feet may be crushed.
– Actuating beyond the battery carrier is prohibi-

ted.

– It is not permitted to walk on the battery holder

plate.

56338011803 EN - 02/2019 - 09

413

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands