Still RX60-25 Original Instructions Manual Download Page 409

Page: 409 / 470

Maintenance

Preserving operational readiness

Maintaining wheels and tyres

WARNING

Risk of accident!
Uneven wear reduces the stability of the truck and

increases the braking distance.
– Change worn or damaged tyres without delay.

WARNING

Risk of tipping!
Tyre quality affects the stability of the truck.
If you wish to use a different type of tyre on the truck

from the tyres approved by the truck manufacturer,

or tyres from a different manufacturer, you must ﬁrst

obtain approval from the truck manufacturer.

WARNING

Risk to stability!
When using pneumatic tyres or solid rubber tyres,

rim wheel parts must never be changed and rim

wheel parts from different manufacturers must not

be mixed.

6311_003-004

Checking the condition and wear of the

tyres

WARNING

Tyre quality affects the stability and handling of the

truck.
Changes can only be made after consultation with

the manufacturer.
When changing wheels or tyres, always ensure that

this does not cause the truck to tilt to one side (e.g.

always replace right-hand and left-hand wheels at

the same time).

56338011803 EN - 02/2019 - 09

395

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 409 / 470

Search results

Summary of Contents for RX60-25

Reviews: