Still RX60-25, Original Instructions Manual

Page: 357 / 470

Operation
4
Replacing and transporting the battery
– Position the change frame (3) under the
battery (2) so that the centre of the battery
(1) is in line with the recess (4) in the change
frame.
This alignment ensures that the battery is
positioned centrally on the change frame. The
battery must be positioned centrally on the
change frame in order for the change frame to
be moved into the truck and to reduce the risk
of the battery tipping over when being moved.
If multiple batteries are used, it is advisable to
permanently mark the centre of the battery (1)
(e.g. using a strip of adhesive tape).
Picking up the battery
CAUTION
Risk of component damage!
– Move the change frame under the battery only
up to the edge of the stop.
6321_003-086
2
– Fold the battery safety catches (2) to the
side.
– Carefully move the change frame under the
battery.
– Carefully lift the battery up and out of the
truck. Pay attention to the distance to the
chassis.
WARNING
Risk of crushing/shearing!
The battery must be transported very carefully, i.e.
at a low speed, using slow steering movements and
careful braking.
– Do not use the methods described above to
transport the battery over long distances.
– Carefully remove the battery from the truck.
56338011803 EN - 02/2019 - 09 343
www. duma -rent.com